Existence, Multiplicity and Infinite Solvability of Positive Solutions for One-Dimensional p-Laplacian

The existence, multiplicity and infinite solvability of positive solutions are established for some two-point boundary value problems of one-dimensional p-Laplacian. In this paper, by multiplicity we mean the existence of m solutions, where m is an arbitrary natural number.     

Photoluminescence linewidth broadening due to alloy/thickness fluctuation of CdxZn1 − xSe/ZnSe triple quantum wells

Photoluminescence (PL) linewidth broadening of Cd_xZn_{1 − x}Se/ZnSe triple quantum wells, grown on GaAs substrates by molecular beam epitaxy (MBE), has been investigated. Various quantum well (QW) samples have been prepared with different QW thickness and composition (Cd-composition). Measured and calculated PL linewidth are compared. Both composition and thickness fluctuations are considered for the calculation with the parameters such as the volume of exciton, nominal thickness and composition of QWs. Surface roughness measured by atomic force microscopy (AFM) is used to estimate the interface roughness. Results show that when Cd-composition increases additional linewidth broadening due to Zn/Cd interdiffusion is enhanced.     

介孔网络电路

用二次阳极氧化法制备纳米多孔氧化铝板,然后用磁控溅射方式在纳米多孔氧化铝板表面镀金得到介孔网络电路,对该介孔网络电路进行输运测量,发现其具有非线性电阻.     

A new stochastic method of reconstructing porous media

We present a new stochastic method of reconstructing porous medium from limited morphological information obtained from two-dimensional micro- images of real porous medium. The method is similar to simulated annealing method in the capability of reconstructing both isotropic and anisotropic structures of multi-phase but differs from the latter in that voxels for exchange are not selected completely randomly as their neighborhood will also be checked and this new method is much simpler to implement and program. We applied it to reconstruct real sandstone utilizing morphological information contained in porosity, two-point probability function and linear-path function. Good agreement of those references verifies our developed method’s powerful capability. The existing isolated regions of both pore phase and matrix phase do quite minor harm to their good connectivity. The lattice Boltzmann method (LBM) is used to compute the permeability of the reconstructed system and the results show its good isotropy and conductivity. However, due to the disadvantage of this method that the connectivity of the reconstructed system’s pore space will decrease when porosity becomes small, we suggest the porosity of the system to be reconstructed be no less than 0.2 to ensure its connectivity and conductivity.     

PREPARATION AND CATALYTIC ACTIVITY OF BIOACTIVE FIBERS

Two kinds of water-soluble metallophthalocyanines, binuclear cobalt phthalocyanine （Co2Pc2） and binuclear ferric phthalocyanine （Fe2Pc2）, were synthesized through phenylanhydride-urea route and characterized by elemental analysis and FT-IR spectra. Binuclear metallophthalocyanine derivatives （Mt2Pc2） were immobilized on silk fibers and modified viscose fibers to construct bioactive fibers of mimic enzyme. Mt2Pc2 was used as the active center of bioactive fibers, viscose and silk fibers as the microenvironments. The catalytic oxidation ability of bioactive fibers on the malodors of methanthiol and hydrogen sulfide was investigated at room temperature. The experimental results indicated that the catalytic activity of such bioactive fibers was closely correlative to the types ofbioactive fibers and substrates.     

The amplified model of erbium-doped fiber amplifier (EDFA) with cross-phase modulation (XPM)

Based on the rate equations and the power propagation equations, the amplified model is obtained which considers the cross-phase modulation (XPM)-induced intensity fluctuation between pump power and signal power in erbium-doped fiber amplifier (EDFA). Simulation results show: a higher nonlinear coefficient and a stronger pump power cause a stronger XPM in EDFA. Before the optimal length of EDF, the intensity caused by XPM increases with the increasing length, but after the optimal length, the XPM presents saturation. A bigger nonlinear coefficient γ corresponds to a smaller optimal length and gain, and makes gain saturation more easy. XPM effect will decrease EDFA’s amplified efficiency.     

一种微穿孔板消声器

本文根据马大猷教授提出的“微穿孔板吸声体精确理论”，在对微穿孔板消声器结构参数与吸声特性之间的相互影响进行了分析的基础上，设计了微穿孔板消声器并将其应用在新舟60飞机APU(辅助动力装置)降噪的实际工程中，并通过编写的噪音数据采集分析程序，对降噪效果进行了测试和分析，验证出微穿孔板消声器对消除飞机的APU的排气噪声具有良好的消声效果，平均降噪7．16dB。     

矩阵方程AXB=D的最小二乘Hermite解及其加权最佳逼近

本中,我们讨论了矩阵方程AXB=D的最小二乘Hermite解,通过运用广义奇异值分解(GSVD)，获得了解的通式。此外,对于给定矩阵F，也得到了它的加权最佳逼近表达式。     

Mid-infrared generation based on a periodically poled LiNbO3 optical parametric oscillator

We report a nanosecond Nd:YVO_4-pumped optical parametric oscillator (OPO) based on periodically poled LiNbO_3 (PPLN). Tuning is achieved in this experiment by varying the temperature and period of the PPLN. The design of double-pass singly resonant oscillator (DSRO) and confocal cavity enables the OPO threshold to be lowered considerably, resulting in a simple, compact, all-solid-state configuration with the mid-infrared idler powers of up to 466mW at 3.41μm.     

基于Gabor小波纹理特征的目标识别新方法

给出了一种基于Gabor小波纹理特征的目标识别新方法．主要是利用Gabor小波设计了一种多通道小波滤波器。对图像目标直接进行小波变换，用Gabor小波变换系数的模的平均值和其标准方差来表示抽取的图像目标的特征，把获得的小波特征归一化后输入到改进的BP神经网络分类器进行分类识别．最后。进行了一系列的仿真实验，结果表明，这种特征提取方法能有效提取图像目标纹理特征，并且对噪音和形状的变化具有鲁棒性．在应用于目标识别时，神经网络的训练时间减少到lOmin，识别率达到94％．